RTKA Series





RTKA SERIES

Diameter Range: BetweenØ80 and Ø1200

Temperature Resistance:200C

Pressure Class: N1(Negative pressure 40Pa)

Corrosion Class: Vm

Type: Double WallChimney System Wet (W) and Dry (D) systems

Natural Gas, LPG, FuelOil, Kerosene, Coal, Fireplace, Stove and Oven

 

RTKA double-walled chimney system is generally used in heating,steam and hot oil boilers and process or hood systems where high-temperaturegases pass. The system is double skinned; Stone wool insulation is placedbetween the walls. It has low thermal conductivity, flue efficiency is high asthe heat of the flue gas is not transferred to the environment significantly.It is manufactured by continuous TIG or PLASMA welding. The flue connectionsare male-female flanged and tightened from the outside with a stainless steelclamp. The system is designed to compensate for the expansion of the inner walldue to high flue gas temperatures. Connections are sealed with high temperaturesilicone. Chimney modules are produced in standard diameters between 80 and1250mm. Inner Wall Thickness; 0.40 to 3.00mm (AISI316L, 1.4404) stainlesssteel, Outer Wall Thickness; It is produced from aluminum between 0.60 and0.80mm.

 

Advantages;

Leak-proof, quick andeasy installation, excellent sealing against condensation, low heat conductionand low outer wall temperature, rapid activation of draft, low surfaceroughness and draft efficiency, special flue terminal and cap design, wideproduct range.

 

Areas of Use;

Burners working withkerosene, fuel oil, natural gas, lpg, coal, wood; It is used in steam boilersand hot oil boilers, where more of these can be used, as hood chimney andventilation chimney.


Straight Module
Elbow
Tee Module
Inspection Doors
Condansate Dish
Supports and Wall Consoles
Reductions / Extensions
Terminals / Cowls
Flashings and Weatherings
Accessories


Rotek Enerji © 2022

Center/Office

Necip Fazıl, Kaynaşlı Sk. No:25/1 34925 Sultanbeyli/İstanbul
rotek@rotek.com.tr
T: +90 216 497 21 21
F: +90 216 497 22 06

Follow Us

Factory

ÇERKEŞLİ OSB MAH. İMES 9.CAD. NO:27 41455 Dilovası/Kocaeli
rotek@rotek.com.tr
T: +90 216 497 21 21
F: +90 216 497 22 06

About US

Rotek Energy & Chimney Systems founded in 1993. Rotek is engaged with production of stainless steel prefabricated and free standing chimney systems, refuse chutes, linen chutes, pneumatic conveying piping products, kitchen hood and industrial hood exhaust ducts, ventilation ducts, air supply and vent towers, flue gas purification filters, chimney damper, silencer, fan and special designed chimney terminals as well as rotary cap for residence building , business and shopping center, hotels, hospitals, factories and industrial plants. Rotek, provides comprehensive solutions to its customers, is the leader company of the sector in Turkey with its experienced, computer systems supported sta, European standard products and after sales service.
TR

RTKA Series



RTKA SERIES

Diameter Range: BetweenØ80 and Ø1200

Temperature Resistance:200C

Pressure Class: N1(Negative pressure 40Pa)

Corrosion Class: Vm

Type: Double WallChimney System Wet (W) and Dry (D) systems

Natural Gas, LPG, FuelOil, Kerosene, Coal, Fireplace, Stove and Oven

 

RTKA double-walled chimney system is generally used in heating,steam and hot oil boilers and process or hood systems where high-temperaturegases pass. The system is double skinned; Stone wool insulation is placedbetween the walls. It has low thermal conductivity, flue efficiency is high asthe heat of the flue gas is not transferred to the environment significantly.It is manufactured by continuous TIG or PLASMA welding. The flue connectionsare male-female flanged and tightened from the outside with a stainless steelclamp. The system is designed to compensate for the expansion of the inner walldue to high flue gas temperatures. Connections are sealed with high temperaturesilicone. Chimney modules are produced in standard diameters between 80 and1250mm. Inner Wall Thickness; 0.40 to 3.00mm (AISI316L, 1.4404) stainlesssteel, Outer Wall Thickness; It is produced from aluminum between 0.60 and0.80mm.

 

Advantages;

Leak-proof, quick andeasy installation, excellent sealing against condensation, low heat conductionand low outer wall temperature, rapid activation of draft, low surfaceroughness and draft efficiency, special flue terminal and cap design, wideproduct range.

 

Areas of Use;

Burners working withkerosene, fuel oil, natural gas, lpg, coal, wood; It is used in steam boilersand hot oil boilers, where more of these can be used, as hood chimney andventilation chimney.


Straight Module
Elbow
Tee Module
Inspection Doors
Condansate Dish
Supports and Wall Consoles
Reductions / Extensions
Terminals / Cowls
Flashings and Weatherings
Accessories

Center/Office

Necip Fazıl, Kaynaşlı Sk. No:25/1 34925 Sultanbeyli/İstanbul
rotek@rotek.com.tr
T: +90 216 497 21 21
F: +90 216 497 22 06

Factory

ÇERKEŞLİ OSB MAH. İMES 9.CAD. NO:27 41455 Dilovası/Kocaeli
rotek@rotek.com.tr
T: +90 216 497 21 21
F: +90 216 497 22 06

Follow Us

About Us

Rotek Energy & Chimney Systems founded in 1993. Rotek is engaged with production of stainless steel prefabricated and free standing chimney systems, refuse chutes, linen chutes, pneumatic conveying piping products, kitchen hood and industrial hood exhaust ducts, ventilation ducts, air supply and vent towers, flue gas purification filters, chimney damper, silencer, fan and special designed chimney terminals as well as rotary cap for residence building , business and shopping center, hotels, hospitals, factories and industrial plants. Rotek, provides comprehensive solutions to its customers, is the leader company of the sector in Turkey with its experienced, computer systems supported sta, European standard products and after sales service.


Rotek Enerji © 2022